Switch just locks up.
- shop@vicihorizon.com
- Member
- Posts: 5
- Joined: Mon Apr 29, 2019 9:03 am
- Has thanked: 0 time
- Been thanked: 0 time
Switch just locks up.
Not sure why because the log gets erased with the reboot, we have a switch that just locks up. WS-8-150-AC 4 ports are powered and 4 are not. Need help figuring out why it stops passing traffic. It may run 1 day it may run 5 but not usually a week before a shutdown. Thanks Jason Keller Horizon Net
-
Stephen - Employee
- Posts: 1034
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 85 times
- Been thanked: 182 times
Re: Switch just locks up.
Will have to do some troubleshooting, first step is if flow control is enabled, please disable it.
Otherwise, post the ports tab, status tab, and config tab.
Otherwise, post the ports tab, status tab, and config tab.
- shop@vicihorizon.com
- Member
- Posts: 5
- Joined: Mon Apr 29, 2019 9:03 am
- Has thanked: 0 time
- Been thanked: 0 time
Re: Switch just locks up.
Flow control is disabled. Has been. I did change from RSTP to just STP yesterday to see if that would fix it. So far no reboots. I have included screenshots of all of our configurations on the switch in question. Thanks Jason Keller Horizon Net
- Attachments
-
- Page 7.pdf
- (126.46 KiB) Downloaded 478 times
-
- Page 6.pdf
- (95.38 KiB) Downloaded 497 times
-
- Page 5.pdf
- (108.34 KiB) Downloaded 494 times
-
- Page 4.pdf
- (103.39 KiB) Downloaded 519 times
-
- Page 3.pdf
- (90.53 KiB) Downloaded 526 times
-
- Page 2.pdf
- (158.92 KiB) Downloaded 488 times
-
- Page 1.pdf
- (112.98 KiB) Downloaded 520 times
- shop@vicihorizon.com
- Member
- Posts: 5
- Joined: Mon Apr 29, 2019 9:03 am
- Has thanked: 0 time
- Been thanked: 0 time
Re: Switch just locks up.
Latest firmware in the switch still rebooted at 5 am.
-
Stephen - Employee
- Posts: 1034
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 85 times
- Been thanked: 182 times
Re: Switch just locks up.
Hmmm this is odd.
Are you using any SFP module's? If so, see if removing them helps. If it does, what type are they? We have a <list> of compatible SFP module's that should definitely be cross-referenced.
Also, it looks like the image's you shared are only a list of the status tab. Please provide screenshot's of the status, ports, and config tab posted using this method:
"To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON." -sirhc
Are you using any SFP module's? If so, see if removing them helps. If it does, what type are they? We have a <list> of compatible SFP module's that should definitely be cross-referenced.
Also, it looks like the image's you shared are only a list of the status tab. Please provide screenshot's of the status, ports, and config tab posted using this method:
"To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON." -sirhc
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 122 guests