Looking at older switches the ground lug is clean.
OLDER
NEWER
Ground Lug on new switches
-
dray - Member
- Posts: 18
- Joined: Sun Oct 04, 2015 12:11 pm
- Location: Las Vegas, NV
- Has thanked: 0 time
- Been thanked: 2 times
Ground Lug on new switches
I just lost a switch after a storm and after closer inspection, I noticed the ground lug was painted over.
Looking at older switches the ground lug is clean.
OLDER
NEWER
Looking at older switches the ground lug is clean.
OLDER
NEWER
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Ground Lug on new switches
It does not matter as the screw is conductive so the lug or wire wrap would get electrical contact from the screw head and the screw is conductive and the screw threads are bare..
Just because you have a ground wire connected does not mean you are lightening or more accurately based on what we see on RMAs ground current damage.
95%+ of RMA damaged units we see is GROUND CURRENT not electrical surge damage it just so happens ground current occurs more commonly during storms.
https://forum.netonix.com/viewtopic.php?f=17&t=5495&p=29607&hilit=+ground+current#p29602
Just because you have a ground wire connected does not mean you are lightening or more accurately based on what we see on RMAs ground current damage.
95%+ of RMA damaged units we see is GROUND CURRENT not electrical surge damage it just so happens ground current occurs more commonly during storms.
https://forum.netonix.com/viewtopic.php?f=17&t=5495&p=29607&hilit=+ground+current#p29602
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: Ground Lug on new switches
dray wrote:I just lost a switch after a storm and after closer inspection, I noticed the ground lug was painted over.
Looking at older switches the ground lug is clean.
OLDER
NEWER
WS6 Low Ohm Ground mod
please see the picture
- Attachments
-
- WS6 Low Ohm Ground mod
-
dray - Member
- Posts: 18
- Joined: Sun Oct 04, 2015 12:11 pm
- Location: Las Vegas, NV
- Has thanked: 0 time
- Been thanked: 2 times
Re: Ground Lug on new switches
Looking at the older screws and new screws, they look like the have more of a coating on them also. I just tested with a multimeter and there is no connectivity through the black paint on the lug, and poor to no connectivity through different parts of the screw. Touching the silver threads inside resulted in good contact.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Ground Lug on new switches
They are black anodized screws, they are completely conductive. I just tested them again to make sure I am not insane.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
dray - Member
- Posts: 18
- Joined: Sun Oct 04, 2015 12:11 pm
- Location: Las Vegas, NV
- Has thanked: 0 time
- Been thanked: 2 times
Re: Ground Lug on new switches
Chris,
Not arguing with you, just FYI just in case they changed something on you that you are not aware of.
New screws are different. Checking the bottom of the heads where the contact would be made, older ones are 0 ohms. New ones have ohms all over the place. They are darker and the coating or whatever it is, is thicker.
I would suggest everyone clean these contact points with a Dremel, or do the mod above.
Not arguing with you, just FYI just in case they changed something on you that you are not aware of.
New screws are different. Checking the bottom of the heads where the contact would be made, older ones are 0 ohms. New ones have ohms all over the place. They are darker and the coating or whatever it is, is thicker.
I would suggest everyone clean these contact points with a Dremel, or do the mod above.
6 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 39 guests