Download latest Firmware

[sirhc]

FIXED
- Fixed shell exit
- Fixed missing field on scheduled port bounces created in CLI which would cause a config file to become corrupt - URGENT
- Fixed occasional invalid statistics reported to the UI
- Fixed clearing of stats on SFP ports
- Removed disabling poe if port has link while turning on power
- Changed SNMP ifName/ifDescr/ifAlias
- Fixed console login when using passwords with special characters
- Fix power budget on WS-8-150-DC
- Fix CDP and LLDP on SFP ports on 12 port models
- Fixed SMTP so it send emails in a background process, could have caused UI to become unresponsive if there was an issue with server
- Fixed reboot command to properly do warm boot
- New fix for IGMP snooping on VLANs
- Fixed incorrect port number on LACP notification
- Fixed color of 100M links on SFP ports

ENHANCEMENTS
- Reduce resource usage of ubiquiti discovery
- Increased Pause Frame Storm Threshold from 10K unsolicited Pause Frames per second for 5 seconds to 15K unsolicited Pause Frames per second for 10 seconds
- Added pause frame count logging when Pause Frame Storm Protection trips
- Add graphic to firmware update
- Added BRIDGE-MIB to SNMP
- Added port name to email
- Added configurable email alerts so you can select which messages are sent via SMTP
- Added ifType to SNMP
- Moved email alerts config to a dialog
- Unexpected link change message now indicates speed
- Added button to flush mac table
- Added America/Creston timezone
- Added QOS Tab
- Added Serial Proxy for SCADA devices

KNOWN ISSUES
- Some language templates need help - please contact us to help

Released 9/6/2016

[sirhc]

FIXED/CHANGED
- Fixed voltage fluctuation that affected a small percentage of WS-6-MINI, WS-8-150-AC, WS-8-150-DC
- Updated SSH daemon to get more modern key exchange algorithm
- Watchdog no longer checks for link on port to be bounced
- Ignore the SFP ports when checking Priority values
- Changed throttle limits between switch core and CPU
- Fixed web UI login only using the first 8 characters of the password
- Removed Address from MODBUS configuration
- Fixed reset button on WS-6-MINI broken since v1.4.1
- Fixed web UI display for mobile devices
- Fixed dot1dStpRootCost SNMP stat being off by one

ENHANCEMENTS
- Added option to bounce link instead of POE for watchdog rules
- Added support for 1000BASE-BX SFP modules (including Fiberstore SFP-GE-BX)
- Added ability to configure QoS based on packet headers (MAC, IP, TCP ports, etc)
- Added support for Mikrotik S-RJ01 SFP module
- Show the SFP model number in UI
- Skip PoE watchdog if PoE is not turned on for a port
- Changed default Revert Timer value from 60 to 180 seconds
- Added range for DSCP and PCP values in QoS rules
- Removed DSCP and PCP mappings from QoS config

KNOWN ISSUES
- Some language templates need help - please contact us to help

Released 11/15/2016

[sirhc]

FIXED/CHANGED
- Fixed dot1dStpRootPort SNMP stat showing the wrong port number
- Fixed layout on small windows (mobile and desktop)

ENHANCEMENTS

KNOWN ISSUES
- Some language templates need help - please contact us to help

Released 11/25/2016

[sirhc]

NOTE: MSTP is still being tested so use MSTP at your own risk.

FIXED/CHANGED
- Fixed temp sensors showing crazy values in very cold environments
- Fixed getting "unexpected link change" messages due to port bounce, watchdogs, etc
- Fixed port bounce being 1 hour off after daylight savings time changes
- Fixed VLAN tab layout getting messed up when you delete a VLAN
- Fixed mac table refresh button causing entire page to reload
- Fixed problem with QinQ when using untagged VLANs
- Fixed fan control handling negative temperatures
- Fixed input voltage graph labels
- Fixed Apply/Save becoming active when looking at MSTP configuration even though nothing changed
- Fixed port number in log messages
- Fixed issue when importing config from a RevE board to a RevF with different POE port options. Affected WS-6 and WS-12
- Fixed the support for WS-8-150-AC
- Fixed console login
- Fixed/Force powerdown/powerup limits on WS-8-150-DC to help prevent switch lock up when draining battery to 9V
- Fixed DC2DC-500 detection for WS-26-500-DC
- Fixed voltage range on dumb DC models
- Fixed QinQ
- Fixed VLAN trunking
- Fixed Access Controls not honouring the Enable setting
- Fixed switch rebooting if multiple ports lose link too quickly
- Fixed multiple ports not turning off at the same time when they have the same shutdown voltage
- Fixed unexpected link change speed message
- Fixed port selection Tabs
- Fixed slight glitch in Input Current graph
- Fixed STP tab on 12 port models
- Fixes for WS-26-500-DC
- Fixed bulk editing Flow Control on Ports tab
- Fixed updating Watchdog description if port name is changed
- Fixed bulk editing on Power tab
- Allow QinQ and Double Tagging to be used with Trunk ports
- Changed UI layout on QOS tab
- Changed dumb DC models to temporarily disable POE when input voltage falls too low instead of disabling POE in the configuration
- Changed valid DC input voltage range to 9-72V in GUI for newer board revs
- Changed valid upper range for dc output voltage from 51V to 53V
- Changed input voltage graph to auto-scale
- Changed fan control to also use CPU and PHY temp
- Changed valid temp range on Status page meters
- Changed input voltage threshold where it forgets the configured Wake up voltage and defaults to 10V Wake up on WS-12-250-DC

ENHANCEMENTS
- Added MSTP
- Automatically disable flow control on ports using QOS bandwidth limits to prevent packet locks
- Added restart timer to DC power supply to help in very cold environments with cold starts
- Added log message when time is set by NTP after boot is finished
- Added logging when STP selects new root port
- Added POE startup delay option on Power tab
- Added root path cost on STP tab
- Added portDuplex SNMP stat from CISCO-STACK-MIB
- Added ifAdminStatus to SNMP stats
- Added support for new WS-26 models
- Added Double Tagged to VLAN configuration
- Added IP Protocol to QoS rules
- Added CIDR notation in QoS Source IP rules
- Added option to log web and ssh logins
- Added LLDP-MIB and CISCO-CDP-MIB to SNMP
- Added option to change MAC aging time
- Added "Disable Power" action to watchdog

KNOWN ISSUES
- Some language templates need help - please private message Eric Stern to help

Released 5/7/2017

[sirhc]

NOTE: IGMP snooping over VLANS, MSTP, and ERPS are still being developed so use these features at your own risk.

FIXED/CHANGED
- Fixed input voltage reading on SMART DC models that may cause false input reading if voltage momentarily drop
- Fixed Changed temp sensor readings on SMART DC models to effect fan speeds
- Fixed SNMP support for Q-SWITCH-MIB, LLDP and CDP
- Fixed IGMP snooping with multiple VLANs
- Fixed DC calibration restarting POE
- Fixed problem with DHCP snooping affecting fragmented UDP packets
- Fixed problem with ERPS enabling forwarding a failed port
- Fixed problem with MSTP setting priority and path cost
- Fixed SSH login with RADIUS when the password contains special characters
- Fixed scheduled port bounce
- Fixed VLAN drag/drop being too sensitive
- Fixed MSTP root message
- Fixed QoS CLI configuration
- Fixed VLAN drag/drop being too sensitive
- Grey out unavailable bulk poe options
- Upper out of voltage range for IDC is now 54V

ENHANCEMENTS
- Added ERPS protocol implementation is g.8032v2 - Ring Protection
- Added BETA note to ERPS
- Added port name to "show interface status" CLI command
- Added an input voltage calibration for DC models
- Improved Q-BRIDGE-MIB support
- Improved fan control on DC models
- Improved stability of ERPS
- Added "Enable Power" action to watchdog
- Added ifMtu to IF-MIB
- Added dot3StatsDuplexStatus from EtherLike-MIB
- Added the time counters were cleared to port detail
- Added watchdog description to email notification
- Added terminal length option to CLI
- Added ability to re-order VLANs using drag and drop
- Enabled IGMP proxy for IGMP snooping
- Added "show igmp" CLI command

KNOWN ISSUES
- Some language templates need help - please private message Eric Stern to help
- IGMP snooping over VLANS, MSTP, and ERPS are still being developed

Released 11/16/2017

[sirhc]

NOTE: IGMP snooping over VLANS, MSTP, and ERPS are still being developed so use these features at your own risk.

FIXED/CHANGED
- Fixed ubiquiti Discovery TAB with new ubiquiti firmware, not sure if this fixes where some have reported issues when doing a UBNT Discovery from a UBNT router causing issues with the Netonix switches?

- Fixed changing VLAN List in MSTP configuration
- Fixed MSTP root message
- Fixed to only show OCP controls if board has OCP

ENHANCEMENTS
- Added ifHighSpeed from IF-MIB
- Added option to enable both SNMP v1 and v2c

KNOWN ISSUES
- Some language templates need help - please private message Eric Stern to help
- IGMP snooping over VLANS, MSTP, and ERPS are still being developed

Released 12/27/2017

[sirhc]

FIXED/CHANGED
- Fixed I2C service to deal with errors better to prevent reboots with WS-12-250-DC and WS-26-500-DC
- Fixed sending CDP frames tagged with VID 1 if the management VLAN is not VID 1
- Fixed SNMP walk failing if VLANs are not in numerical order
- Fixed using hash mark in SMTP password
- Fixed using hash mark in RADIUS password
- Fixed issues with Loop Protection on SFP ports
- Fixed intermittent telemetry error on Device/Status TAB mostly seen with WS-26-500-DC
- Fixed power TAB shutdown time set to 12 AM would turn off poe on that port]
- Fixed ST/RSTP bridge priority change would not update properly
- Fixed cli on WS-8-150-DC model's allowing one to set the power restart/shutoff from cli
- Fixed scheduled portbounce to no longer trigger unexpected link status change email
- Fixed SNMP broken in v1.5.0rc5 due to a build mistake
- Fixed SNMP handling longer firmware version
- Extended length for URL resource for SMTP recipient address

ENHANCEMENTS
- Optimized code to reduce CPU utilization especially needed for the WS-26-500-DC
- Changed watchdog waits + Interval seconds before checking again after watchdog is triggered
- Added log entry to report if the switch rebooted due to watchdog timer
- Added lldpRemPortId, lldpRemPortIdSubtype, and lldpRemPortDesc to LLDP-MIB
- Added cdpCacheDevicePort to CISCO-CDP-MIB
- Added popover for POE enabled ports on 'Watts' column to show power usage on each pair for VH ports
- Added root bridge id to STP log message
- Added Low Voltage notification for DC model's to contain the threshold and the present value in the log/email
- SNMP Contact and Location character limit increased from 26 to 255 characters
- Improved ability to deal with loops while loop protection, flow control, and STP disabled to not reboot
- Added checkbox to SYSLOG Configuration called "Log Name" which appends the switch name to messages
- Added Calling-Station-Id to RADIUS attributes to allow freeradius to log ip address of client

KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help - please private message Eric Stern to help
- IGMP snooping over VLANS, MSTP, and ERPS are still being developed

Released 6/4/2018

[Stephen]

NOTE: WE REMOVED v1.5.1 FROM CIRCULATION AS THERE IS A BAD BUG WITH STP INTERACTING WITH LAGS.

PLEASE USE V1.5.2rc4 OR NEWER. ALSO YOU MUST USE v1.5.2rc4 OR NEWER WITH ANY RECENTLY PURCHASED SWITCHES AS YOU NEED THIS FIRMWARE TO PROPERLY DRIVE THE NEW FANS.


FIXED/CHANGED
- Fixed voltage input calibration for the WS-8-150-DC
- Fixed services running on IPv6
- Fixed being able to bypass console login by hitting CTRL-C
- Fixed MSTP setting instance forwarding state
- Fixed UI on ERPS tab to prevent footer from from being mangled
- Fixed ERPS MEPs issue that triggered a Signal Fail on a ring when port not in the ring is disconnected/disabled
- Fixed ERPS issue that prevented access to Management VLAN when added to the protected VLAN list
- Fixed ERPS protected VLANs would not forward packets outside of the ring
- Fixed SNMP (Broken in v1.5.1rc3)
- Fixed Access Controls for a confirmed security vulnerability -(for more details check this thread: viewtopic.php?f=12&t=4103 )
- Fixed UI bug in Access Control List
- Fixed DHCP failure when switch has a static ip assigned to a vlan
- Increased time buffer for warning voltage email trigger
- MAC Table search works using colons and dashes
- update for new fans
- fixes for PoE sensor balloon performance issue and data display
- fix for LACP LAG breaking during config changes

ENHANCEMENTS

KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help - please private message Eric Stern to help
- IGMP snooping over VLANS, MSTP, and ERPS are still being developed

Released 1/28/2019

[Stephen]

FIXED/CHANGED
- Fixed IGMP snooping
- Fixed IGMP snooping with multiple VLANs
- Fixed disabling IGMP querier
- Fixed IGMP handling tagged frames
- Fixed STP/LAG issue, this fix prevents switches from being locked out when access is through a lag
- Fixed STP/LAG issue, significant performance improvement when making configuration changes
- Updated Copyright
- Memory Leak found in Discovery process has been fixed (please report any more occurrences)
- Fan settings storage was not applying changes for new fans


ENHANCEMENTS
- Added IGMP Snooping monitoring in the web UI (Device -> IGMP Snooping). Aready in CLI ("show igmp")
- Port Selection De-selection now functions with the ports graphic at top of switch web UI
- Legacy/New fan test is now asynchronous, reboots/upgrades are now much faster
- Added button to fan status to allow user to initiate an asynchronous fan test
- Discovery tab now allows for individual to select which protocol is being searched for instead of all simultaneously
- Discovery tab configuration is more intuitive
- Fan test now records results and only needs to re-run if manual test is activated, firmware update occurs, or default occurs
- Rebuild Discovery process and now runs more efficiently on larger layer 2 segments

KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help - please private message Eric Stern to help


Released 3/25/2019

[sirhc]

FIXED/CHANGED
- fixed issue with watchdog poe bounce that was not completely shutting off power depending on the delay time and offset's used
- This version had to be pushed as a new production run has a new temp sensor as old was discontinued
- fixed memory leak in NET-SNMP

ENHANCEMENTS
- Modified Port Bounce option to read 'Port Bounce POE' and added 'Port Bounce Link' manual option for status and ports tab
- Option in discovery configuration now exists to disable the switch from broadcasting on discovery protocols while the discovery tab is enabled
- link bounce option exists for the watchdog as well as the POE bounce option.

KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help - please private message Eric Stern to help

Released 7/27/2019