Firmware Road Map
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: Firmware Road Map
Best way to keep log is to send it to an external log server like ELK or Graylog ;-)
-
Omniflux - Experienced Member
- Posts: 113
- Joined: Tue Feb 24, 2015 3:04 pm
- Has thanked: 5 times
- Been thanked: 32 times
Re: Firmware Road Map
Yes, and this works great, until the link that connects back to the server is the one with the problem. This is actually the specific issue I had recently, and while I could get someone out to power cycle the switch and restore service, I could not get anyone out there who could capture the log directly from the switch to find out why that specific port had stopped passing traffic.
-
LRL - Experienced Member
- Posts: 238
- Joined: Sun Nov 23, 2014 4:00 am
- Location: Rock Springs, WY
- Has thanked: 18 times
- Been thanked: 49 times
Re: Firmware Road Map
Could we get a SNMP OID for overall FAN state like Good/Bad?
There is no way (that I could find) to enabled TFTP automatic backup from CLI only via web.
There is no way (that I could find) to enabled TFTP automatic backup from CLI only via web.
-LRL
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
- Norcom
- Member
- Posts: 1
- Joined: Sat Apr 07, 2018 2:19 am
- Has thanked: 0 time
- Been thanked: 0 time
Re: Firmware Road Map
Is there any risk of upgrading firmware in a WS-26-500-DC from version 1.4.7 to the latest 1.5.15?
Who is online
Users browsing this forum: No registered users and 36 guests