v1.5.7rcX Bug Reports and Comments

[Stephen]

FIXED/CHANGED
- Enabling/Disabling ports on MSTP could result in loss of connectivity - RC2
- updating VLANs port types was not registered with MSTP - RC1

ENHANCEMENTS

KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help - please private message Stephen Copeland to help

RC2 Released 12/10/2020
RC1 Released 12/9/2020

[JustJoe]

The VLAN ID change seems to work now.

But the STP per port enable/disable still struggling

viewtopic.php?f=17&t=6787#p33880

See latest posts in that thread for details.

[JustJoe]

The VLAN ID change seems to work now.

But the STP per port enable/disable still struggling

viewtopic.php?f=17&t=6787#p33880

See latest posts in that thread for details.

Updated that thread to report very good results with v1.5.7rc2. Unable to recreate any of those issues.

[Kevo]

Is the TLS browser security issue addressed in this release?

[Omniflux]

These are issues I've reported against earlier versions that still exist


NETONIX-SWITCH-MIB::dcdcEfficiency is missing the instance subidentifier (.0)

If an element is queried from a non existent table, it appears the next table is used for the reply instead of No Such Object.

Code: Select all

$ snmpget -v2c -c public -On 100.96.49.2 .1.3.6.1.2.1.2.2.1.6.3
.1.3.6.1.2.1.2.2.1.7.3 = INTEGER: up(1)


This fills my NMS logfile with lines like

Code: Select all

 SNMP response from host "100.96.60.2" contains variable bindings that do not match the request: sent ".1.3.6.1.2.1.2.2.1.6.10", received ".1.3.6.1.2.1.2.2.1.7.10"

[JustJoe]

Added a new MSTP bug report:

viewtopic.php?f=17&t=6787&p=33984#p33984

This bug existed at least as far back as v1.5.6, but couldn't isolate & document it until now.

[Stephen]

Is the TLS browser security issue addressed in this release?

No, it will be done before 1.5.7 is fully released though.

[wtm]

Is the 802.3ad LAG issue going to be addressed. The switch will NOT do more than 2 LAG ports that are using the 802 standard. You must use the "rr balanced" mode for it to even work. This is a problem with 1.5.1 and later software.

[Stephen]

wtm, I do intend to tackle the LAG issue before 1.5.7 is complete. There are a few things I have to do first though.

However, it might help to know that the WS3's 10G switches are available now which might help you circumvent the issue.

[bayamon]

Any news on fixing LAG issues on Netonix?