Version 1.2.0rc5
Odd Problem with 8 Port
-
WisTech - Associate
- Posts: 213
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 8 times
- Been thanked: 64 times
Odd Problem with 8 Port
I'm having a strange problem again between ports. Just powered up port 5 with a new 620AC here in the office and lost access to the switch. Moved the radio to port 3 and powered it on, can't access the radio (default) but can now access the switch. I was unable to access the switch until I unplugged port 5. Here's what the MAC table looks like, and the address of the 620AC I plugged in.
Version 1.2.0rc5
Version 1.2.0rc5
-
WisTech - Associate
- Posts: 213
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 8 times
- Been thanked: 64 times
Re: Odd Problem with 8 Port
Just tried the same radio with a toughswitch 5 powering it. No problem. Able to access the TS5, the 620AC and the Netonix wired to the same LAN.
-
JustJoe - Experienced Member
- Posts: 266
- Joined: Sat Aug 02, 2014 11:33 pm
- Has thanked: 94 times
- Been thanked: 59 times
Re: Odd Problem with 8 Port
Any chance the 620AC is associating to an AP and causes a layer2 loop back and around through your net?
I always find it suspicious to see a a MAC in the table twice.
I always find it suspicious to see a a MAC in the table twice.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Odd Problem with 8 Port
I do not know Tony, please provide more info.
Was the AC radios default?
Is there anyway the radio could connect to anything and cause a loop?
Did you check the log of the switch?
I would love to help but I really can't unless I am there looking at it or unless you provide me all the details needed to try and help.
What WS firmware version are you running?
Provide screen caps of the switch Tabs Ports / VLANs(if you have any or say no VLANS) / LAG (if you have any) / Device Config Tab
In this case maybe a capture of the Device log would be helpful.
How you described this does not allow me to help as obviously I run my WISP with these switches and we plug UBNT radios in to our switches all the time and do not have this issue so something has to be different here rather it is a bug in our code or something your doing?
Was the AC radios default?
Is there anyway the radio could connect to anything and cause a loop?
Did you check the log of the switch?
I would love to help but I really can't unless I am there looking at it or unless you provide me all the details needed to try and help.
What WS firmware version are you running?
Provide screen caps of the switch Tabs Ports / VLANs(if you have any or say no VLANS) / LAG (if you have any) / Device Config Tab
In this case maybe a capture of the Device log would be helpful.
How you described this does not allow me to help as obviously I run my WISP with these switches and we plug UBNT radios in to our switches all the time and do not have this issue so something has to be different here rather it is a bug in our code or something your doing?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
WisTech - Associate
- Posts: 213
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 8 times
- Been thanked: 64 times
Re: Odd Problem with 8 Port
No sir... lol =) This isn't the first time this has happened, Chris has seen this before on a hilltop with vlans. *wink*
The MAC crossing ports like that has me concerned again.
The MAC crossing ports like that has me concerned again.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Odd Problem with 8 Port
WisTech wrote:No sir... lol =) This isn't the first time this has happened, Chris has seen this before on a hilltop with vlans. *wink*
The MAC crossing ports like that has me concerned again.
That issue was resolved a long time ago I thought? What firmware version are you running?
As I said please provide screen grabs of all tabs so we can help.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
WisTech - Associate
- Posts: 213
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 8 times
- Been thanked: 64 times
Re: Odd Problem with 8 Port
sirhc wrote:I do not know Tony, please provide more info.
Was the AC radios default? Absolutely, 1.20 (with no other 1.20 on the network) and works fine in a TS5 on the same LAN
Is there anyway the radio could connect to anything and cause a loop? No sir... No other AC's here in the area it could even remotely connect to.
Did you check the log of the switch? Will do
I would love to help but I really can't unless I am there looking at it or unless you provide me all the details needed to try and help.
What WS firmware version are you running? I posted the version, 1.2.0rc5.
Provide screen caps of the switch Tabs Ports / VLANs(if you have any or say no VLANS) / LAG (if you have any) / Device Config Tab This switch is BONE ass stock, no VLANS, no LAG, etc. Literally changed passwords and enabled power.
In this case maybe a capture of the Device log would be helpful.
How you described this does not allow me to help as obviously I run my WISP with these switches and we plug UBNT radios in to our switches all the time and do not have this issue so something has to be different here rather it is a bug in our code or something your doing?
-
WisTech - Associate
- Posts: 213
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 8 times
- Been thanked: 64 times
Re: Odd Problem with 8 Port
This is the log with the AC620 plugged into port 7 on the switch. I am unable to access the 620AC but can access the switch.
-
WisTech - Associate
- Posts: 213
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 8 times
- Been thanked: 64 times
Re: Odd Problem with 8 Port
And no... the freaking AC Test AP is not defaulted, lol. I have that port disabled so another 620 attached to an NSM5 with POE Passthrough enabled can associate to measure power draw under load.
Speaking of... I cannot access the NSM5 with the 620 plugged into port 7, but can access the other 620 that's plugged into the POE passthrough port on the NSM5! LOL
Speaking of... I cannot access the NSM5 with the 620 plugged into port 7, but can access the other 620 that's plugged into the POE passthrough port on the NSM5! LOL
Who is online
Users browsing this forum: No registered users and 23 guests