No access
-
garry@hsbnv.net - Member
- Posts: 10
- Joined: Mon Dec 08, 2014 3:54 pm
- Has thanked: 0 time
- Been thanked: 1 time
No access
We upgraded a switch on a tower location. 1.1.5. Its pinging andd I can ssh into it but no Gui access. We have rebooted and tried reload cold. No luck. How do I reload the firmware from the cli?
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: No access
when you say you have no access, do you mean the user name/password are not accepted?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: No access
There is no easy way to upgrade the firmware via the CLI.
What version were you upgrading from?
We have had the following reported issues:
1) During the upgrade the password got changed and the user could not login to the web UI which required setting the password via console cable to fix.
2) An issue where the password was defaulted to "admin".
3) Rare issue where the switch upgrades, reboots, brings up all the links and passes traffic normally but the switch UI, CLI, and pings "to the switch IP" stop responding that require the user go to the tower and either plug into any port and it wakes up the UI or reboot the switch and all is fine.
Keep in mind there are hundreds of switches out there in service and a few people have had these issues, now do not get me wrong 1 person with an issue is too many and we are trying to figure them all out.
But I have never heard of the web UI not responding but you can ping it and log into the CLI?
What version were you upgrading from?
We have had the following reported issues:
1) During the upgrade the password got changed and the user could not login to the web UI which required setting the password via console cable to fix.
2) An issue where the password was defaulted to "admin".
3) Rare issue where the switch upgrades, reboots, brings up all the links and passes traffic normally but the switch UI, CLI, and pings "to the switch IP" stop responding that require the user go to the tower and either plug into any port and it wakes up the UI or reboot the switch and all is fine.
Keep in mind there are hundreds of switches out there in service and a few people have had these issues, now do not get me wrong 1 person with an issue is too many and we are trying to figure them all out.
But I have never heard of the web UI not responding but you can ping it and log into the CLI?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: No access
Do you have Team viewer, could we possibly gain access to this switch?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
garry@hsbnv.net - Member
- Posts: 10
- Joined: Mon Dec 08, 2014 3:54 pm
- Has thanked: 0 time
- Been thanked: 1 time
Re: No access
We can ping but the going through the browser I get nothing. No log in page. Just "This webpage is not available"
-
garry@hsbnv.net - Member
- Posts: 10
- Joined: Mon Dec 08, 2014 3:54 pm
- Has thanked: 0 time
- Been thanked: 1 time
- NickOlsen
Re: No access
Have you tried browsing to the page WITH https:// ?
There might simply be an issue with the http>https redirect in the HTTPD config.
There might simply be an issue with the http>https redirect in the HTTPD config.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: No access
garry@hsbnv.net wrote:We can ping but the going through the browser I get nothing. No log in page. Just "This webpage is not available"
And not to be insulting but I have to asked you have closed the browser and reopened it and even tried a different machine?
If you can load Teamview on your laptop maybe Eric could come in see whats up as he really needs the SSH access anyway to see whats going on.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
garry@hsbnv.net - Member
- Posts: 10
- Joined: Mon Dec 08, 2014 3:54 pm
- Has thanked: 0 time
- Been thanked: 1 time
Re: No access
I will get that to you as soon as I have time. Yes I have tried all that.
9 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 34 guests