Firmware v1.1.8 bug reports and comments

[mayheart]

Upgraded two switches from v1.1.0rc19 to 1.1.8 with no problems.

[garry@hsbnv.net]

Great firmware. Loads quick and comes right up. No manual reboot necessary.

[iggy05]

Upgraded two of my switches today. Went without a problem. Thanks for the hard work!

[jjonsson]

No issues what so ever with 1.1.8.

Did have VLAN issues with 1.2.0rcX whatever it was called. v1.1.8 seems very stable :-)

Keep up the good work Netonix team

[WisTech]

1.1.8 has been working great for us so far. No crazy issues like the ones I mentioned when running 1.2.0rc5.

[sbyrd]

I just installed my first WispSwitch replacing a TS-5. When setting up SNMP monitoring I accidentally left the monitor on the old UBNT snmp community string. It still read the new switched SNMP information just fine using the wrong community string. Should it work that way?

My other UBNT, Canopy, and Mikrotik devices will not SNMP walk with the wrong community string but the Netonix will.

[sirhc]

I just installed my first WispSwitch replacing a TS-5. When setting up SNMP monitoring I accidentally left the monitor on the old UBNT snmp community string. It still read the new switched SNMP information just fine using the wrong community string. Should it work that way?

My other UBNT, Canopy, and Mikrotik devices will not SNMP walk with the wrong community string but the Netonix will.

Please report the version of firmware you are running, there have been several SNMP changes over the life of this firmware.

[sbyrd]

1.1.8

[sirhc]

1.1.8

Try v1.2.0rc11