I've had problems with Packet Loss from an indoor router to a outdoor ws-mini. After some testing I am sure it is the quality/length of the cable.
I replaced it and the packet loss is gone.
What leaded me in the wrong direction is that ws-mini did not show errors on this port. I guess there should be a lot FCS-Errors. Packet loss was massive.
FW=1.2.2.
Sure the error counter is correct?
Error counters OK?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Error counters OK?
Nice catch. I am buried right now and do not have time to follow this up other then send a link to this post to Eric but I know he is buried right now trying real hard to get the firmware done for the DC switch with Dave.
If you do not mind BUMP this thread in a couple weeks if there is no other movement on it.
If you do not mind BUMP this thread in a couple weeks if there is no other movement on it.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: Error counters OK?
Yes, the error counters are correct. From your description these errors should have been counted as "Rx CRC" in the Port Detail.
-
ste - Member
- Posts: 84
- Joined: Fri May 22, 2015 5:33 am
- Location: Regensburg Germany
- Has thanked: 2 times
- Been thanked: 13 times
Re: Error counters OK?
Eric Stern wrote:Yes, the error counters are correct. From your description these errors should have been counted as "Rx CRC" in the Port Detail.
I checked the cable and found the ground was not connected to the housing of the plug. Seems this generates a condition where there are no errors shown in the statistics despite heavy packet loss.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Error counters OK?
Do you have your tower ground BONDED to your electrical service ground?
PLEASE READ THIS WHOLE THREAD
viewtopic.php?f=30&t=188
PLEASE READ THIS WHOLE THREAD
viewtopic.php?f=30&t=188
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 84 guests