Here is the mechanical specifications.
We do eventually plan to sell an adapter for this but as of yet we do not.
CUI Inc │ MODEL: PJ-002BH-SMT │ DESCRIPTION: DC POWER JACK
- barrell.jpg (113.98 KiB) Viewed 7537 times
WS-6-MINI Barrel connector
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
WS-6-MINI Barrel connector
Many of you have asked about the WS-6-MINI Barrel connector.
Here is the mechanical specifications.
We do eventually plan to sell an adapter for this but as of yet we do not.
CUI Inc │ MODEL: PJ-002BH-SMT │ DESCRIPTION: DC POWER JACK
Here is the mechanical specifications.
We do eventually plan to sell an adapter for this but as of yet we do not.
CUI Inc │ MODEL: PJ-002BH-SMT │ DESCRIPTION: DC POWER JACK
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sdwisp - Member
- Posts: 20
- Joined: Tue May 19, 2015 11:21 am
- Location: San Diego Ca
- Has thanked: 4 times
- Been thanked: 3 times
Re: WS-6-MINI Barrel connector
The Power plug is not standard to any Ubiquiti or MikroTik power supplies that I have in stock.
Not including a transformer with a $160.00 switch with an odd size plug is surprising to me.
Is there a reason for the odd plug size?
Eric @ SDWISP
Not including a transformer with a $160.00 switch with an odd size plug is surprising to me.
Is there a reason for the odd plug size?
Eric @ SDWISP
Eric Williams
619-468-9600
SDWISP
619-468-9600
SDWISP
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-6-MINI Barrel connector
Is there a reason that the Ubiquiti jack is not standard with ours? - LOL
No particular reason, I suppose Dave just selected it based on availability.
We do plan to offer an optional power brick with the mating connector probably this summer.
I am not aware of any UBNT barrel connector power bricks that are 48-50V 1.3A or higher? What UBNT power adapter are you referring to?
I also am not familiar with Microtic at all.
No particular reason, I suppose Dave just selected it based on availability.
We do plan to offer an optional power brick with the mating connector probably this summer.
I am not aware of any UBNT barrel connector power bricks that are 48-50V 1.3A or higher? What UBNT power adapter are you referring to?
I also am not familiar with Microtic at all.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: WS-6-MINI Barrel connector
hmmm, it is a standard...never occurred to me to check to see if it was same standard big brother uses...sigh...
-
wayneorack - Experienced Member
- Posts: 129
- Joined: Thu Sep 04, 2014 12:16 pm
- Location: San Angelo, TX
- Has thanked: 188 times
- Been thanked: 64 times
Re: WS-6-MINI Barrel connector
It is standard enough for me. I have a lot of stuff with that exact plug. Including the 48 VDC power supply that comes with CISCO phones that usually goes in the trash....
-
ryanm - Member
- Posts: 63
- Joined: Tue Jul 29, 2014 11:00 pm
- Has thanked: 36 times
- Been thanked: 16 times
Re: WS-6-MINI Barrel connector
I got a couple of these in. They appear to fit correctly. I'm powering my switch with the tycon injector right now, so no need to try it.
http://www.mouser.com/ProductDetail/Kob ... QSnxY04%3d
http://www.mouser.com/ds/2/449/KC-300331-205813.pdf
http://www.mouser.com/ProductDetail/Kob ... QSnxY04%3d
http://www.mouser.com/ds/2/449/KC-300331-205813.pdf
-
ste - Member
- Posts: 84
- Joined: Fri May 22, 2015 5:33 am
- Location: Regensburg Germany
- Has thanked: 2 times
- Been thanked: 13 times
Re: WS-6-MINI Barrel connector
The Mikrotik gige poeadapter works. There is the smaller barrelconnector.
-
gudly - Member
- Posts: 10
- Joined: Fri May 22, 2015 5:54 pm
- Location: Ramona, CA
- Has thanked: 0 time
- Been thanked: 1 time
Re: WS-6-MINI Barrel connector
All of our power supplies are 12v and 24v with the exceptions of a few -48v from our licensed links. None of our barrel connectors seem to fit even if we wanted to chance it.
Would it be possible to post links for some power supplies we could buy either poe or barrel. We'd prefer not to take a chance damaging the switch with the wrong power supply.
Thanks
Doug
Would it be possible to post links for some power supplies we could buy either poe or barrel. We'd prefer not to take a chance damaging the switch with the wrong power supply.
Thanks
Doug
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-6-MINI Barrel connector
Well one POE adapter that works well is the POE adapter used with the airFIBER 24.
If you are using our other switches to power airFIBERS elsewhere you will have a few extra now?
you can buy replacement POE adapters for the airFIBER units at most resellers.
We do plan to sell our own power supplies SOON!
If you are using our other switches to power airFIBERS elsewhere you will have a few extra now?
you can buy replacement POE adapters for the airFIBER units at most resellers.
We do plan to sell our own power supplies SOON!
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
WS-6-MINI jack dimensions and polarity
Hi,
I couldn't find in the WS-6-MINI specsheet "ws-specsheet.pdf" what is the size of the jack and what its polarity is. Mikrotik 48V 2A jack doesn't fit.
May be this one will work ?
http://www.ebay.com/itm/AC-100V-240V-Co ... 1238460213
5.5mm x 2.5mm
inside +
outside -
It would be nice to find this information in the spec sheet in the future.
I couldn't find in the WS-6-MINI specsheet "ws-specsheet.pdf" what is the size of the jack and what its polarity is. Mikrotik 48V 2A jack doesn't fit.
May be this one will work ?
http://www.ebay.com/itm/AC-100V-240V-Co ... 1238460213
5.5mm x 2.5mm
inside +
outside -
It would be nice to find this information in the spec sheet in the future.
Last edited by te31 on Thu Jul 02, 2015 11:23 am, edited 1 time in total.
Who is online
Users browsing this forum: Google [Bot] and 76 guests