You still have not bought a WISP Switch?
My favorite one is the WS-12-250-AC
MPLS in switch?
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: MPLS in switch?
Cisco 2951 with a couple EHWICs
You still have not bought a WISP Switch?
My favorite one is the WS-12-250-AC
You still have not bought a WISP Switch?
My favorite one is the WS-12-250-AC
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
jjonsson - Associate
- Posts: 337
- Joined: Wed Nov 05, 2014 12:30 pm
- Location: Denmark
- Has thanked: 37 times
- Been thanked: 65 times
Re: MPLS in switch?
sirhc wrote:
Same here!
I'm really missing VRF-Lite in the EdgeRouter. Could be so nice to have different VLANs OSPF routed. Think about letting others into your network. No problem. Give them their own VLAN....
I haven't had any pause frame issues since I swapped my switches from TOUGHswitch
to Netonix 
That said I'm afraid that I will experience the problem again some time. Maybe not since I'm swapping out all PtP links with AF5X or PowerBeam AC (Only very small sites, where AF5X is not affordable) and later all Rockets M5 with Rocket AC...
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: MPLS in switch?
Well you "may" have a problem eventually as you use EdgeMAX routers.
I was talking to Matt Hoppes and he said Ancheng will eventually put Flow Control support into the EdgeMAX Routers but it is not high on the priority apparently? But the good news is that Flow Control is supported in the hardware they just have to enable it via software change.
I can not stress enough how important it is to carry Flow Control all the way back to a routed point in your network, if not all you are doing is putting more and larger buckets under the first bucket which they too will fill up and start dropping packets.
So until you have Flow Control from AP to Router your just kicking the can down the hallway which when it does catch up with you the issue will be worse.
The alternative is to have an AP that has a full blow router in it with enough CPU and Memory of course.
I was talking to Matt Hoppes and he said Ancheng will eventually put Flow Control support into the EdgeMAX Routers but it is not high on the priority apparently? But the good news is that Flow Control is supported in the hardware they just have to enable it via software change.
I can not stress enough how important it is to carry Flow Control all the way back to a routed point in your network, if not all you are doing is putting more and larger buckets under the first bucket which they too will fill up and start dropping packets.
So until you have Flow Control from AP to Router your just kicking the can down the hallway which when it does catch up with you the issue will be worse.
The alternative is to have an AP that has a full blow router in it with enough CPU and Memory of course.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Who is online
Users browsing this forum: No registered users and 128 guests