v1.2.2 FINAL bug reports and comments

[jportman]

More on DHCP not working.

It appears from a factory default setting, DHCP will work on both LAN1 and SFP1.

Turn on VLAN trunking and DHCP _might_ work on LAN1 (not always).

With VLAN trunking turned on, DHCP absolutely will not work on SFP1.

I am attaching a config that does not work.

[sirhc]

I asked Eric to look into your issue tomorrow.
If you can specify a lab to recreate it at will he will fix it so please post as much info on this as you can.

[Eric Stern]

More on DHCP not working.

It appears from a factory default setting, DHCP will work on both LAN1 and SFP1.

Turn on VLAN trunking and DHCP _might_ work on LAN1 (not always).

With VLAN trunking turned on, DHCP absolutely will not work on SFP1.

I am attaching a config that does not work.

Here is a new firmware you can try. It has a newer version of the dhcp client that might help. Note that this is a beta firmware, but it should be stable enough for you to test.

firmware/wispswitch-1.3.0rc8.bin

[ste]

SNMP stops working. Need to Disable/Enable to make it run again. Using NetXMS / SNMP v2c.

Edit: Now enable/disable does not help. Needs a reboot.

[Eric Stern]

SNMP stops working. Need to Disable/Enable to make it run again. Using NetXMS / SNMP v2c.

Edit: Now enable/disable does not help. Needs a reboot.

Is there anything in the Log?

[mike99]

[quote="]http://forum.netonix.com/firmware/wispswitch-1.3.0rc8.bin[/quote]

Why is not 1.3.0rc8 shown on the beta thread ?
viewtopic.php?f=17&t=681

[ste]

SNMP stops working. Need to Disable/Enable to make it run again. Using NetXMS / SNMP v2c.

Edit: Now enable/disable does not help. Needs a reboot.

Is there anything in the Log?

No.

[RebusCom]

I'm forwarding a request. Would it be possible to add port descriptions (when available) to the syslog instead of just the port numbers? It would make them more readable without having to memorize all the ports on all the switches.

[sirhc]

We could do that but the log entry would sometimes be long and cause word wrap and it would eat up more memory. I would like to conserve memory for some cool feature we are planning like longer historical periods for graphing.

If you see an entry in the log like in the picture below, say port 8.

Now all you have to do is move your mouse cursor to hover over port 8 and a balloon will pop up and tell you the Description/Name.

Now mind you print screen does not show the course but I have my mouse cursor hovering over port 8.

CLICK IMAGE BELOW TO VIEW FULL SIZE

log.jpg (132.29 KiB) Viewed 6208 times

[RebusCom]

I guess what he was referring to was the remote syslog.