On port 5 of the mini I have a backhaul radio making a link to remote network consisting out of several other routers. Some routers away from this Mini the vlan10 has an end point on an interface of a internet router.
In between the Mini and the internet router the vlan is transparently (by having physical interfaces of passing routers bridged) passed through.
Before the Mini I always had a small router that also bridged the incoming port 1 (from central) with the outgoing port 5 (backhaul to remote).
But I am not completely sure how to set the mini up so the vlan with ID=10 also transfers transparent from port 1 towards port 5
Port 1 up to port 5 of the mini are all in one IP domain/network and all routers (also remote ones behind the link connected to port 5) are reachable by plain routing from the central.
But instead of reaching the remote internet gateway by routing (so I have to set the routes in all passing routers) I want to one route in my central pointing to the endpoint IP of the vlan10. (This vlan act as a failover link towards remote internet gateway if local internet gateway fails.)
I attached a screendump on how I presume it should be set... can any please acknowledge or correct?
- Screenshot 2015-08-10 18.21.44.png (88.61 KiB) Viewed 2692 times
