Power on ports of DC Switch
-
garry@hsbnv.net - Member
- Posts: 10
- Joined: Mon Dec 08, 2014 3:54 pm
- Has thanked: 0 time
- Been thanked: 1 time
Power on ports of DC Switch
I have a DC 12 port Switch WS-12-250-DC. I have it powered with 12 volts. When I turn power on a port it trurns on as long as something is plugged in. But will not stay on if nothing is plugged into the port. If I set a port to power up and save it. when the switch reboots all ports power is then turned off. So I set the ports to on, take it to the site power it up on site and all the ports are now set to off for power.
-
garry@hsbnv.net - Member
- Posts: 10
- Joined: Mon Dec 08, 2014 3:54 pm
- Has thanked: 0 time
- Been thanked: 1 time
Re: Power on ports of DC Switch
Never Mind I found it. I disabled the PS on each port.
-
sirhc - Employee
- Posts: 7421
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: Power on ports of DC Switch
This is the POE SMART feature.
POE Smart was supposed to have been changed that it would not TURN POE OFF if the cable was unplugged but was apparently not.
However with that being said it is NOT a good idea to unplug and plug LIVE POE ports.
You can turn it off under the Ports Tabs under the Column heading PS. If you mouse over the heading it should say POE Smart. Uncheck the boxes below
to turn OFF POE Smart for the ports.
DO NOT DOWN GRADE THE DC SWITCH TO V1.2.X OR AN OLDER VERSION OF v.1.3.X AS THIS WILL BREAK THE UNIT.
IT SHOULD NOT ALLOW YOU TO DOWN GRADE TO V1.2.5 BUT SADLY IT WILL ALLOW YOU TO DOWN GRADE IT TO V1.3.0rc11 OR OLDER WHICH WILL BRICK THE UNIT.
POE Smart was supposed to have been changed that it would not TURN POE OFF if the cable was unplugged but was apparently not.
However with that being said it is NOT a good idea to unplug and plug LIVE POE ports.
You can turn it off under the Ports Tabs under the Column heading PS. If you mouse over the heading it should say POE Smart. Uncheck the boxes below
to turn OFF POE Smart for the ports.
DO NOT DOWN GRADE THE DC SWITCH TO V1.2.X OR AN OLDER VERSION OF v.1.3.X AS THIS WILL BREAK THE UNIT.
IT SHOULD NOT ALLOW YOU TO DOWN GRADE TO V1.2.5 BUT SADLY IT WILL ALLOW YOU TO DOWN GRADE IT TO V1.3.0rc11 OR OLDER WHICH WILL BRICK THE UNIT.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 6 guests