WS-12-250-DC added feature
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: WS-12-250-DC added feature
We will be releasing a v1.3.1 with the reported bug fixes maybe this evening.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- bgoode
- Member
- Posts: 21
- Joined: Tue Jul 21, 2015 12:20 pm
- Location: AZ USA
- Has thanked: 1 time
- Been thanked: 2 times
Re: WS-12-250-DC added feature
Posts elsewhere on this forum state that for short cables lengths 24v is fine.
It is not possible to "in rapid succession" bounce the port with the web gui....the pop up window procedure and refresh takes more time than "rapid succession". There may be a way to do it with CLI but I don't know how to do that.
There is no surge protection...this is a lab setup with the AF5x connected with a 50ft coiled up STP cable.
I re-did the test and, you're right, the shorts weren't real....it seems that you have to wait for the AF5x to completely boot (considerably longer that other ubnt radios) and then do the cable diags...
Pair 1 Status OK
Pair 2 Status OK
Pair 3 Status OK
Pair 4 Status OK
I get the same results with 24v and 24VH.
The original test port 3 still shows the pair 2 short with nothing plugged into the port.
I guess my question is whether the very, very short bounce routine would put inrush current stress on the port causing the failure...and by extension, whether the rapid power cycle could do any harm to the radio and would it be prudent to extend the bounce time to something longer as with the original 5 seconds.
It is not possible to "in rapid succession" bounce the port with the web gui....the pop up window procedure and refresh takes more time than "rapid succession". There may be a way to do it with CLI but I don't know how to do that.
There is no surge protection...this is a lab setup with the AF5x connected with a 50ft coiled up STP cable.
I re-did the test and, you're right, the shorts weren't real....it seems that you have to wait for the AF5x to completely boot (considerably longer that other ubnt radios) and then do the cable diags...
Pair 1 Status OK
Pair 2 Status OK
Pair 3 Status OK
Pair 4 Status OK
I get the same results with 24v and 24VH.
The original test port 3 still shows the pair 2 short with nothing plugged into the port.
I guess my question is whether the very, very short bounce routine would put inrush current stress on the port causing the failure...and by extension, whether the rapid power cycle could do any harm to the radio and would it be prudent to extend the bounce time to something longer as with the original 5 seconds.
- Xtremewave
- Member
- Posts: 14
- Joined: Wed Oct 01, 2014 4:24 pm
- Location: Baytree Alberta Canada
- Has thanked: 6 times
- Been thanked: 0 time
Re: WS-12-250-DC added feature
How much of a cost would it be to have the another feature like Port Bounce but have it set on a timer that will auto kill the poe every 7,14,21,28 days? and keep the power off for 5 mins? For my use this would be a great improvement to your already great switch
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: WS-12-250-DC added feature
You can do that now?
CLICK IMAGE BELOW TO VIEW FULL SIZE
This would turn off Port 3 every 7 days for 5 minutes
CLICK IMAGE BELOW TO VIEW FULL SIZE
- 7day.jpg (48.46 KiB) Viewed 8487 times
This would turn off Port 3 every 7 days for 5 minutes
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- Xtremewave
- Member
- Posts: 14
- Joined: Wed Oct 01, 2014 4:24 pm
- Location: Baytree Alberta Canada
- Has thanked: 6 times
- Been thanked: 0 time
Re: WS-12-250-DC added feature
wow me so darn busy i missed that thanks for this.
Who is online
Users browsing this forum: No registered users and 139 guests