Say what? What is crazy Matt up to now.
So the airFiber radios will track RF to Ethernet port state, meaning if the RF drops (rain fade, link failure, etc) the Ethernet port will drop so that the network converges to a backup link very quickly. NICE!
I just had a thought, if I'm using a Netonix as a mid-span injector for my backhaul, which then goes to a router, I have no way to take advantage of this as the airFiber will drop the port, but the switch port connected to my router is still up, so OSPF/BGP will converge slower.
I would like to see the ability to have a port on the Netonix track the state of a different port.
EXAMPLE:
airFiber24 plugged into port 12, router plugged into port 11.
airFiber24 loses RF link, so it shuts down Ethernet to port 12. Port 12 now shows no link.
Netonix then shuts down port 11, which instantly causes the router to activate the backup link rather than waiting for an OSPF timeout.
Thoughts?
IDEA: Port state follows port state
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: IDEA: Port state follows port state
Well you can tune ospf and or impliment BFD
Personally I don't care for that feature on the air fiber if your doing in band management because you lose contact/control of the radio.
Now if you're using the management port and not using in band ok i guess???
Tune OSPF and or use BFD
So if your using that feature and in band and say something else is wrong now how do you see the radio is the port is down?
Personally I don't care for that feature on the air fiber if your doing in band management because you lose contact/control of the radio.
Now if you're using the management port and not using in band ok i guess???
Tune OSPF and or use BFD
So if your using that feature and in band and say something else is wrong now how do you see the radio is the port is down?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: IDEA: Port state follows port state
It only shuts down for a few seconds. But it causes an instant convergence.
Don't you have a four second outage or four ping outage when your links fail over?
Don't you have a four second outage or four ping outage when your links fail over?
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: IDEA: Port state follows port state
BFD is at most 1 ping
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: IDEA: Port state follows port state
Please do not try and power af24 on port 11 - lol
Ports 1-4 only depending on model
Ports 1-4 only depending on model
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: IDEA: Port state follows port state
Even without bfd I had our old af24 like converging in about 3-4 seconds.
Set hello timer to 1 sec, dead timer to 2 seconds.
Set hello timer to 1 sec, dead timer to 2 seconds.
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: IDEA: Port state follows port state
I was thinking about this for you Matt
I am headed to Canada to meet with Eric and Dave next weekend and I think i have an idea we could impliment that will give you what you want
Basically a new feature for ping watch dog where it does not turn off poe but rather disables a port for x seconds
I am headed to Canada to meet with Eric and Dave next weekend and I think i have an idea we could impliment that will give you what you want
Basically a new feature for ping watch dog where it does not turn off poe but rather disables a port for x seconds
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: IDEA: Port state follows port state
Could not it be done via LAG ? If the AF24 is down, the other link on the same LAG should continue to pass traffic.
It would be nice to have a option to disable wireless on AF24 if the're too much frame lost or the modulation rate goes too low but it should be managed by the AF24, not the switch.
It would be nice to have a option to disable wireless on AF24 if the're too much frame lost or the modulation rate goes too low but it should be managed by the AF24, not the switch.
8 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 112 guests