What do you guys think about bonding two AF-5x links together in parallel between two towers?
I have a site I need more bandwidth at.
Bonding two AF-5x Links
-
WisTech - Associate
- Posts: 213
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 8 times
- Been thanked: 64 times
Re: Bonding two AF-5x Links
Sounds amazing, especially if you have the spectrum to do so.
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: Bonding two AF-5x Links
You can use LAG to bond 2 equal capacity links but keep in mind if their capacity varies too much you risk having issues.
And since the capacity will be less than the physical link state which is all Layer 2 is aware of you could have issues if you approach the aggregated capacity or one link's capacity dips too much.
You can use higher level 4 protocols such as OSPF as well
And since the capacity will be less than the physical link state which is all Layer 2 is aware of you could have issues if you approach the aggregated capacity or one link's capacity dips too much.
You can use higher level 4 protocols such as OSPF as well
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
kbloch - Member
- Posts: 34
- Joined: Thu Sep 04, 2014 10:45 am
- Location: Western USA
- Has thanked: 1 time
- Been thanked: 6 times
Re: Bonding two AF-5x Links
Bond the links if unequal capacity and aggregate them if equal capacity.
Advantage on either method is redundancy in case of a link failure and increased capacity when both are working.
Advantage on either method is redundancy in case of a link failure and increased capacity when both are working.
-
sirhc - Employee
- Posts: 7420
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: Bonding two AF-5x Links
kbloch wrote:Bond the links if unequal capacity and aggregate them if equal capacity.
Advantage on either method is redundancy in case of a link failure and increased capacity when both are working.
As I said if they are of equal value LAG is an option but if the capacity varies you will run into trouble when traffic on one side exceeds the current capacity as Layer 2 is only physical link state aware.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
6 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 124 guests