Download Latest Release Candidate Firmware

[sirhc]

THIS IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR AN ENTITY), THE END USER, AND NETONIX, LLC. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT DOWNLOAD THE SOFTWARE FROM OUR WEB SITE AND DO NOT INSTALL THE SOFTWARE.

BY DOWNLOADING THE SOFTWARE ON THIS PAGE, YOU ARE AGREE TO THE FOLLOWING:

1. Grant of License
Netonix, LLC grants to you a non-exclusive, non-transferable license, without right to sublicense, distribute or modify.

2. Title
The software is copyrighted by Netonix, LLC. Netonix, LLC retains all rights, title, and ownership of the software and all subsequent full or partial copies and derivatives of the Product, made by you or Netonix, LLC, including translations, compilations, partial copies, modifications, and updates. This license is not a sale of the software or any copy or derivative. You shall have no right to reproduce any full or partial copies of the software. You agree not to take any steps, such as reverse assembly or reverse compilation, to derive a source code equivalent of any software contained in the product.

3. Warranty Exclusion
YOU UNDERSTAND THAT THIS PRODUCT IS PROVIDED "AS IS". THERE ARE NO WARRANTIES UNDER THIS AGREEMENT, AND NETONIX, LLC DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.[/size]

4. Limitation of Liability
IN NO EVENT SHALL NETONIX, LLC BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES PURSUANT TO THIS AGREEMENT.

5. Proprietary Rights Exclusion Netonix, LLC makes no representation or warranty that the Product, or products developed using the Product, do not infringe any proprietary rights of any third parties. You shall assume sole responsibility for any such infringement.

6. Indemnification
You hereby agree to indemnify, defend and hold Netonix, LLC harmless from and against any and all claims, actions, suits, liabilities, judgments, losses, damages, attorneys' fees and other expenses of every nature and character by reason of this Agreement or use by you of products utilizing the Product.

7. Export Restrictions
You shall not export, directly or indirectly, any Product or products developed using the Product to any country for which the laws of the United States or the regulations of any U.S. agency requires an export license or other governmental approval, without first obtaining such license or approval. You shall strictly comply with all such restrictions. You agree to indemnify and hold Netonix, LLC harmless against all losses, damages, penalties, or causes of action resulting from a violation of this Section.

8. U.S. Government Restricted Rights
This Product is provided with Restricted Rights. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause CA 252.227-7013 or subparagraphs (a) through (d) of the Commercial Computer Software -Restrictive Rights clause CA 52.227-19, as reserved under the copyright laws of the United States. Manufacturer is Netonix, LLC, 154 Earland Drive, Building 5C, New Holland, PA 17557

9. Governing Law
The validity, performance, construction and interpretation of this Agreement shall be governed by laws of the state of Pennsylvania, United States of America, excluding its conflicts of laws rules, as applied to agreements entered into in Pennsylvania between Pennsylvania residents.

PLEASE COMMENT ON THE FIRMWARE GOOD OR BAD FOR OTHER USERS IN THIS POST THREAD

NOTE: WITH v1.3.X WE HAVE A NEW MIB AND OUR OWN ENTERPRISE NUMBER

CLICK HERE TO DOWNLOAD MIB for v1.3.X - Netonix's Private Enterprise Number (46242)

[quote="v1.3.4rcX - Release Candidate / BETA"]
FIXES

ENHANCEMENTS

THIS IS BETA FIRMWARE SO IF YOU DO NOT WANT TO LIVE ON THE EDGE USE v1.3.3 FINAL.
Click HERE to download firmware v1.3.4rcX - Released XX/XX/XXXX

[sirhc]

Thanks sirhc for the fast firmware turnaround.

I upgraded that 1.3.2 switch to 1.3.3rc5, tagged management is working again.

1.2.3 to 1.3.3rc5 was also successful without any problems.

[Magician]

Earlier today I ran into an issue with a new WS-12-AC-250 when connecting it to a Ubiquiti ER-X-SFP via fiber sfp. I had not seen this issue with my other switches nor when connecting to ER-PRO units. I called up Chris and mentioned the issue and informed him that if I set the router to 100 full duplex the link would come up. Chris mentioned that they had been working on a similar issue reported on a Mikrotik Router and sent me a RC build to try that allowed me to set sfp to "auto". Well it worked like a charm and even though at this point I do not know which vendor is having the issue I have a solution for the configuration.


I upgraded (3) of my Netonix switches to v1.3.3rc5 tonight without issue (2) WS-12-250A and (1) WS-6-mini. Everything has been smooth sailing and once it makes it to release all my units will get upgraded.

Excellent work guys

[mike99]

Just put it on 3 switchs (2 12-250A and 1 24-400A) I'm working on for a tower update. Firmware upgrade when fine. I confirm that the mac-table on SFP for 12-250A is now working fine.

Thanks.