WS-8-250-AC switches cause each other to stop pinging

[rgunderson]

I have a strange issue when I access 2 my Netonix switches at the same time: they take turns dropping pings and the GUI shows the red banner "Attempting to reestablish communication with the device ...". So I thought I had a bridge loop somewhere but after turning off everything except the 2 switches tonight I have established there is no chance of a bridge loop. The only thing out of the ordinary that I noticed is that the MAC address of the switches are identical

THR.gif (118.22 KiB) Viewed 5472 times

WM.gif (118.14 KiB) Viewed 5472 times

. How does that happen and how can it be fixed?

[sirhc]

Well that should not happen (Same MAC Address)

I can however fix that.

Please get the MAC addresses from the decals on the bottom of the 2 switches and PM them to me.

I may be a little slow responding today as I am working from home sic with a 101F fever.

[rgunderson]

Well that should not happen (Same MAC Address)

I can however fix that.

Please get the MAC addresses from the decals on the bottom of the 2 switches and PM them to me.

I may be a little slow responding today as I am working from home sic with a 101F fever.

Chris, Sorry to hear your sick. This is NO RUSH! I'll get the information for you soon but I don't want to hear back from you until you're under 100F. In the meantime take care of yourself!

[lligetfa]

I am working from home sic with a 101F fever.

Chris, Sorry to hear your sick.

Same here bud. Take care of yourself.

https://www.youtube.com/watch?v=iZZUY32iCzU

[Dave]

What, are you guys crazy, until any of us have a fever of 104, get back to work & stop slacking....

[rgunderson]

Ya, been there, done that, but then afterwards you wonder why you did it!

[rgunderson]

Well that should not happen (Same MAC Address)

I can however fix that.

Please get the MAC addresses from the decals on the bottom of the 2 switches and PM them to me.

I may be a little slow responding today as I am working from home sic with a 101F fever.

Chris, I hope you're feeling better. I sent you a PM but it still sitting in my 'outbox'.

[sirhc]

I reprogrammed the MAC to what it should be but I accidentally rebooted the switch because I just copied and pasted my script in I normally use on the bench and forgot to remove the reboot at the end.

I hope this was not in service?

[rgunderson]

We're good. I had it isolated on the bench! Do I need to do anything?

[sirhc]

We're good. I had it isolated on the bench! Do I need to do anything?

NO it should now have the right MAC?