Good Day,
Now that the weather has gotten colder my one WS-12-250-DC is reporting "Fan 1 Failure". and I see it drop to 0 RPM. It will then speed up to 2400RPM.
This board is running 1.3.2.
The PHY Temp is only 106F. Once the PHY gets up to 109F the fan spins up to 2,200RPMs again. I'm *guessing* the fan is stopping because the outdoor temperature has dropped significantly and the fan no longer needs to run to keep it cool. Is this an incorrect handling of the report of the fan stopping?
Feb 3 17:33:06 switch[1330]: Fan 1 is failing
Feb 3 17:33:12 sSMTP[2304]: Sent mail (221 2.0.0 Bye) uid=0 username=admin outbytes=399
1.3.2 - Fan Failure Reported?
-
LRL - Experienced Member
- Posts: 238
- Joined: Sun Nov 23, 2014 4:00 am
- Location: Rock Springs, WY
- Has thanked: 18 times
- Been thanked: 49 times
Re: 1.3.2 - Fan Failure Reported?
This sounds just like the issue I reported here
-LRL
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: 1.3.2 - Fan Failure Reported?
Matt
Please upgrade to latest released code.
Dave
Please upgrade to latest released code.
Dave
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 1.3.2 - Fan Failure Reported?
Matt,
We have been addressing the false fan failure notices with just about every other firmware release and it has gotten a lot better each time with less people having issues.
There were major fixes in v1.3.8 for DC switches so I strongly recommend you upgrade anyway.
But when people report an issue with an older firmware revisions you know the first thing we are going to say is upgrade to the latest version because we can not chase bug reports on older firmware releases?
We have been addressing the false fan failure notices with just about every other firmware release and it has gotten a lot better each time with less people having issues.
There were major fixes in v1.3.8 for DC switches so I strongly recommend you upgrade anyway.
But when people report an issue with an older firmware revisions you know the first thing we are going to say is upgrade to the latest version because we can not chase bug reports on older firmware releases?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: 1.3.2 - Fan Failure Reported?
Yup. That's fine. Just wanted to make sure upgrading had the potential to do something before I did it.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 42 guests