LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWITCHES

[tcknudson]

Reported to Work with WISP Switches by customers:
Alcoma ALxxF MP600X-PoE works fine with 48VH - Manufacturer cautions not to use the two-pair power in any case.
Cambium ePMP 1000 - 48V *newer versions (non-GPS) only support 24V w/ crossover - check sticker under cover
Cambium ePMP 2000 - 48V
Cambium PTP 650 - 48VH
Cambium 450 AP - 24V
Cambium 450i AP - 48V
Cambium 820S - 48VH or MAYBE 48V *check in to*
Cambium 820C - 48VH
Cambium Force 180 - 24V
Cambium Force 200 - 24V
Cambium Pmp 450Medusa - 48VH
Ceragon IP-20C - 48VH
Dragonwave Compact - 48VH
Dragonwave Horizon Compact - 48VH
Dragonwave Horizon Compact+ - 48VH
Exalt Extendair G2 - 48VH
Grandstream GXV3674 Camera Works with 48V
HIKVision Camera - 48VH
Ignite MetroLinq - 24VH preferred, 24V will work
Ligowave branded SAF Freemile - 48V
Ligowave PtP 5-23 - 48V
Ligowave Rapidfire
Mimosa A5 - 48VH
Mimosa B5 - 48VH, ymmv with 48V on short cables
Mimosa B5C - 48VH, ymmv with 48V on short cables
Mimosa B5 Lite - 48VH, 48V
Mimosa B11 - 48VH preferred, 48V
Mikrotik CCR1009-8g-1S-1S+ : 48V only - 24V WILL BREAK THINGS
Mikrotik RBs with POE in - 24V
Netgear ProSAFE GS108T v2 - 48V
Radwin 5000-HPMP (RW-5100-8225) - 48V
SAF Integra - 48VH
SAF Lumina - 48VH - With POE splitter only
SIAE ALFOplus - 48VH
Siklu 2200FX - 48VH
Siklu EH-8010FX works with 48HV

Ubiquiti AirCRM - 48V
Ubiquiti AirFiber 24 - 48VH only
Ubiquiti AirFiber 2x - 24V or 24VH, 48V or 48VH
Ubiquiti AirFiber 3x - 24V or 24VH, 48V or 48VH
Ubiquiti AirFiber 5x - 24v or 24VH - 04:18:D6:E3:08:E9 or higher MAC 48V or 48VH
Ubiquiti AirFiber 5 - 48VH only
Ubiquiti airMAX M2 - 24V only
Ubiquiti airMAX M3 - 24V only
Ubiquiti airMAX M5 - 24V only
Ubiquiti Powerbridge M10 - 24V
Ubiquiti Titanium Rocket - 48V only
Ubiquiti Rocket AC lite - 24V
Ubiquiti UAC AP (gen 1, square) - 48V
Ubiquiti UAP-AC-Lite/LR - 24V
Ubiquiti UAP-AC-PRO/EDU - 48V
Ubiquiti UAP Outdoor5 - 48V
Wavion WBS-2400-Sect - 24V

Reported to works with POE crossovers by customers:
Cambium ePMP 1000 non-GPS - 24V (check the sticker!)
Canopy AP100 - 24V (tycon crossover)
Canopy 430AP 5790APUS (swap 4 with 7, 5 with 8 on far side of cable)
Canopy 450AP - 24V (tycon crossover)
Trango 5010 - 24V
Tlink-45 5055 - 24V

This thread is for people to list radios that work with Netonix POE switches, and any modifications that were required.

This way people might not have to experiment on expensive radios that someone else already tested like Saf, Dragon Wave, Ligowave, Trango Apex?

Regular Canopy AP100 and 450AP, most sm's , and Trango 5010 work well with POE crossovers by Tycon, on 24V Standard (NOT 24VH)

Mimosa B5 and B5C works on 48VH or 48V Standard on shorter cables

Mimosa B5 Lites work on 48V Standard.

AirFiber 24 and AirFiber 5 works on 48VH

Dragonwave Compact worked standard 48VH (straight Cable)

SAF Lumina worked standard 48VH (straight Cable)

airFIBER 2X, airFIBER 3X, and airFIBER 5X work with 24V standard up to about 160 feet of cable and 24VH for runs up to 326 feet of cable.
DO NOT USE 24VH ON ANY AIRMAX RADIOS OR YOU WILL FRY THE RADIO AND THE PORT.
NOTE: According to UBNT new models of AFX radios will also support 48V and 48VH, see UBNT forum for more info or search this forum for other users post on their findings.

Here's the URL on UBNT's wiki that details which MACs do/dont support the 48V power on 5X. Note that 2X and 3X all support it.
https://help.ubnt.com/hc/en-us/articles ... ut-voltage

CLICK IMAGE BELOW TO VIEW FULL SIZE

Canopy 430Ap 5790APUS works fine with Pin 4 crossed to Pin 8 "on far side of cable only".

Ligowave branded (SAF Freemile?) worked fine on 48v

Please post utter failure that resulted in damage to the radio and or switch port as well which may save someone else.

Please do not hijack this thread and do not re-post radios already posted.

Keep the thread short and to the point so people do not have to wade through nonsense posts.

[jjonsson]

LigoWave PtP 5-23
Unit running on 48V

avatar.jpg (5.32 KiB) Viewed 89291 times

[sirhc]

Of course all airMAX M2, M3, and M5 series use 24V NOT 24VH

avatar.jpg (3.11 KiB) Viewed 89291 times

Titanium Rockets use 48V NOT 48VH

avatar.jpg (3.73 KiB) Viewed 89291 times

airFIBER 24 and airFIBER 5 use 48VH only

avatar.jpg (3.32 KiB) Viewed 89291 times

airFIBER X radios use 24VH - THey are the only radios that use 24VH. THey will also work on 24V less than 200' of cable.

AFX

avatar.jpg (3.11 KiB) Viewed 89291 times

[ste]

SAF Integra works with 48VH

avatar.jpg (14.08 KiB) Viewed 89291 times

MT Routerboards with POEin use 24V
E.g. the RB850Gx2 is a good/small addition to add Routing functionality to a switched site.

avatar.jpg (17.43 KiB) Viewed 89291 times

[cwachs]

Cambium ePMP runs great at 48V.

Newer versions only support 30 volts and it will fry them, check sticker under cover!
I was going thru a stack and then fried the newest radio.

Only NonGPS radios are 30V max. GPS radio support both cambium and standard pinout and work fine at 48V (those are 802.3af compatible).

avatar.jpg (3.36 KiB) Viewed 89291 times

Ubiquiti AirCRM at 48V.

[qlex]

Siklu 2200FX at 48VH working.

avatar.jpg (5.38 KiB) Viewed 89291 times

[slarner]

Siae ALFOplus radios at 48VH working @ 1G full duplex.

avatar.jpg (7.79 KiB) Viewed 89282 times

Even got the management to come over the main port never been able to get this working before!!

Pulling 30W at idle with TX turned off.

[wifi442]

Mikrotik CCR1009-8G-1S-1S+ is running great on 48V

It supports 14v to 57v input on the poe port however it draws as much as 35 watts which is way too much for 24V (1.5amps)

Running at 48v puts us back at .75amps which is good to go for the Netonix ports ;)

[keefe007]

Dragonwave Horizon Compact and Horizon Compact + work on 48V HV

Dragonwave.jpg (3.55 KiB) Viewed 89064 times

[tcknudson]

Newer versions only support 30 volts and it will fry them, check sticker under cover!
I was going thru a stack and then fried the newest radio.

Cambium ePMP runs great at 48V.