Certainly. In my last picture, on the ports tab, I programmed in the limiting section "10 Mbps". Notice the space between the 10 and the Mbps. The software allows me to save it this way. However when I connect a device (a home router or a computer) to the port with the limiting programmed into it the switch goes into a failure mode that requires disconnecting the device and doing a physical reboot on the switch. The switch will work just fine as long as nothing is plugged into the port with the limiting.
10 Mbps (no good)
10Mbps (good)
port limiting causing failure
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: port limiting causing failure
gudly wrote:Certainly. In my last picture, on the ports tab, I programmed in the limiting section "10 Mbps". Notice the space between the 10 and the Mbps. The software allows me to save it this way. However when I connect a device (a home router or a computer) to the port with the limiting programmed into it the switch goes into a failure mode that requires disconnecting the device and doing a physical reboot on the switch. The switch will work just fine as long as nothing is plugged into the port with the limiting.
10 Mbps (no good)
10Mbps (good)
What browser are you using?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
gudly - Member
- Posts: 10
- Joined: Fri May 22, 2015 5:54 pm
- Location: Ramona, CA
- Has thanked: 0 time
- Been thanked: 1 time
Re: port limiting causing failure
I've done it in IE as well as Chrome with the same results
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: port limiting causing failure
gudly wrote:I've done it in IE as well as Chrome with the same results
I created a bug fix request for next release.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Who is online
Users browsing this forum: Google [Bot] and 46 guests